Tuesday, December 10, 2013

SLIDING SASH WINDOWS

A recent post took me back to the traditional sliding sash windows that I so admired as a young man engrossed in the practicalities of building work.  I decided to set about building a typical sash window in Revit ... piece by piece.



Let's start with the sill section.  A nice chunky piece of solid wood with a fairly simple section.  You need to cut some notches out at each end to take the linings that define the boxes.  These boxes house the weights.  In the windows I dealt with, the weights were always cast iron, but we'll get to that.



Between the linings is the pulley stile, rebated down both sides to fit into grooves in the linings, and with a groove down the centre for the parting bead.  This is a slim section of wood that serves to keep the two sashes apart and guides them as they slide up and down.  The parting bead is removable to enable maintenance operations such as replacing sash cords.



The sashes themselves are moving parts, so they need to be quite robust.  You don't want the joints to shake loose.  Hence the use of mortice & tenon.  The weak point of this kind of joint is the end grain directly above the mortice which can split and open up the joint.  The best protection is to "leave horns", extensions of the sash stiles which are often given a decorative shape.



I'll come back to the mortice & tenon in another post, get into wedges etc, but for now let's move on. My model is coming together quite nicely now.  You can get quite a good idea of how the parts fit together.



Generally speaking, stiles are vertical elements, rails are horizontal. Double doors have meeting stiles, sometimes rebated so they fit together nicely.  Sliding sashes have meeting rails, which also could be rebated, to avoid a wide open gap like the one below.  Notice the stiffening blocks to support the linings along the top of the frame. If you think about the way the parts fit together you'll see why this is necessary.



Once the sash boxes are fitted into the wall, we will need a way to access the weights.  Cut out a pocket with a half-lap joint at the top and a splayed joint below.  I've actually put this on the wrong side by mistake.  As shown below it's exposed to the weather.



Made myself a little nested family to represent the pulleys.  Notche out a housing for these in the pulley stile.



Fit the outer sash first.  The sash cords are nailed into a groove in the side of the sash.  We used to use short galvanised nails with a nice flat head.  Once upon a time the weights would have been lead, but all the windows I ever worked on used mass-produced cast-iron weights.  Slot the parting beads into place to hold the outer (top) sash then you can fit the inner (bottom) sash.  This is held in place by the staff beads.  These have a nice bull-nose profile which leaves a convenient slot where you can fit a screwdriver to level them out again for future maintenance.



Now you wouldn't want to make a detailed model like this to insert into a model thirty or forty times.  I'm doing this as a research project, for didactic purposes, but it could be a "typical detail" file in a real project.  The window families deployed in the project would be somewhat simpler in their modelling, more use of symbolic lines.



You can see the rebated meeting rails clearly in the image below, and the linseed oil putty creating a weather seal around the glass.  The glass is first bedded in putty, then held in place with small glazing sprigs (nails).  The outer putty is applied and cut off clean with a glazing knife.



Moving on to how these windows fit into a wall, my example is a typical Victorian or Edwardian terrace from the north of England.  Housing for the masses during Britain's industrial heyday.  Construction is load-bearing brickwork.  A "one brick wall", ie 9 inches thick, equal to the length of one brick.  The widow sits on top of a shaped stone sill.  A rebate is formed in the other 3 sides of the opening. The window sits snugly into this rebate so that most of the frame is concealed.  The outer lintel is stone and often has a bit of decorative carving.  The inner lintel is timber.



In the next image you can see the internal plaster going on to the wall.  This will finish flush with the frame and then architraves will be applied to cover the junction.  In the houses I worked on (and lived in) the plaster was black, blast-furnace slag mixed with lime.  That was the thick levelling coat.  To finish, a thin skim coat of lime putty.  That was in the olden days.  For our renovations we were using gypsum plaster.  By the way I'm using the "Parts" feature to split the wall into its separate layers and cut back the inner plaster.  It's a great feature when you need it and living proof that the factory is still busy extending the capabilities of our favourite software in significant ways.  (I slipped that in for the moaners who think that the annual releases aren't exciting enough :-)



That's as far as I've taken it.  Not quite finished.  Shows the power of a BIM application like Revit.  If I had drafted this in 2d, the results after a couple of hours would be more impressive, but after a full day the BIM advantage is kicking in and you're starting to get "views for free".  And of course when you discover mistakes or change your mind it's much easier to make changes and update the whole drawing set.



I'm going to finish with some sash windows from my photo archive.  There are examples from New York and London in there, plus a couple of other towns.  Windows built to last, both in construction and style.  I love them, and I love knowing how they work.  But there is always more to learn so please send in your comments, corrections, snippets of knowledge about how things were done in different times & places.










29 comments:

  1. Never thought about such details while making window in Revit. Normaly every one make a window as it looks in elevation. Ever tried a metal section side hung window ?
    LJU

    ReplyDelete
  2. Thanks for the comment. The purpose of this kind of study is largely educational. In a project I would use a ,much simpler family. You can regard this as some kind of historical research project. Metal windows could be steel or aluminium. The sections and construction method are very different. I would like to make this the subject of a future post. As designers I think we need to be aware of why things are made the way that they are & this often requires a bit of historical background. It's a subject that fascinates me & I hope to continue to share my thoughts and explorations on this blog.

    ReplyDelete
  3. Nice! Very nice!!!
    Can we download your family somewhere?

    ReplyDelete
  4. Needs a bit of clean up - some time in the new year

    ReplyDelete
  5. I forgot to tell you today that you are awesome. This reminded me. :)

    I have a thing for historic architecture and construction. I was a restoration carpenter and a blacksmith for a while. Very cool stuff Mr. Milburn. Very cool.

    ReplyDelete
  6. That's a wonderful idea. Thanks for sharing. window shades and blinds are really useful in ones home. It not only gives us the privacy but also protects us from possible debris that might be caused by an accident outside and also protects the furniture from the UV rays that damages them.

    ReplyDelete
  7. I must say, this is a pretty well-mounted plan. Would love to see this finally in execution, and be put in place fully around such house or building. I think people should look into all sorts of window configurations to employ in their facade.

    Jim @ Renewal Of Maine

    ReplyDelete
  8. Thanks everyone for the comments, but please go easy on the spam or you might get deleted.

    ReplyDelete
  9. Hi,
    Your representations are "as always" brilliant,
    I just want to ask about how did you made the lintels, in the inner side it seems that they are covered with the finish layer, did you made the distance between the brick layer and the finish one as a reporting parameter?, or is it just a dimension parameter that you change for every wall (not very BIM i know), i did it as nested family but when you flip the wall it doesn’t turn with it, (spent two days on it so far).
    Thank you for your time.

    ReplyDelete
  10. Sliding SASH windows are really good windows more than others.

    Window Maintenance Ltd

    ReplyDelete
  11. This comment has been removed by the author.

    ReplyDelete
  12. This comment has been removed by the author.

    ReplyDelete
  13. Prefect Andrew, nice detail and great look for window

    ReplyDelete
  14. With the help of proper window restorations and Draught Proofing, we may prevent great heaps of warmth from getting out of the confines of our home and with this best effect provides a lowering in noise reduction as all those openings would need to be fixed up. Actually the overall construction of the sash window restorations looks quite heavy by nature that’s why they employ a great tendency which misplaces lots of fresh air through a numerous gaps that appear as time.
    replacement sash windows

    ReplyDelete
  15. Nice work and great examples. Thank you, Sir! :-)

    ReplyDelete
  16. I keep finding myself revisiting this page, thanks Andy!

    ReplyDelete
  17. thank for the wonderful post , lots of information gained , visit us Revit Modeling in uk

    ReplyDelete
  18. Thanks for this. I really like what you've posted here and wish you the best of luck with this blog and thanks for sharing. Large Vertically Sliding Glass Windows

    ReplyDelete
  19. Добрый день! Рекомендуем путеводитель применяемых медикаментозных препаратов. В справочное издание вошли сведения о более чем семистах выпускаемых лекарствах, производимых российскими и зарубежными фармацевтическими компаниями. О каждом медикаментозном средстве показана подробная инфа: состав и форма выпуска, целительные характеристики, показания к использованию, критерии применения, возможные побочные эффекты, противопоказания, взаимодействие с алкоголем и взаимодействие прочими медикаментозными средствами, также возможность приема при грудном вскармливании, беременности. В путеводитель включен тематический указатель, где представлена информация о том, какое медицинское средство необходимо применять при каких-то синдромах, болезнях, состояниях. Справочное издание лежит на специализированном портале. Выздоравливайте! Ацетогексамид, Цефтизоксим, Диметилтубокурарин, Артикаин, Эпоэтин бета, Висмута субгаллат,

    ReplyDelete
  20. Keep sharing such informative posts. Professional home renovation and remodeling agency offers affordable decorating service, this includes thorough preparation of the area and surfaces before starting the actual painting and decorating. Call 01795 554530 today!
    Loft conversion in Faversham

    ReplyDelete
  21. Perfect blog, Nicely described the best quality sliding sash windows

    ReplyDelete
  22. Thanks for sharing this valuable blog, Best home extension contractor offers affordable building services Southend on Sea. Contact us today!
    builders in Southend on sea

    ReplyDelete

  23. I love to read this blog and the Contents of your blog is so amazing and interesting. I have gotten a lot of information about Sliding Sash Windows from this blog . If you want to choose the best window company then visit energy glazing and find different stylish windows and doors.

    ReplyDelete
  24. It's one of the best blog I have came through, keep sharing such updates.
    wooden Windows in Chiswick

    ReplyDelete
  25. Your blog provides valuable insights! For Troy, MI residents looking for Vinyl siding contractors in your area American Accents is the team to trust. Their expertise and attention to detail set them apart.

    ReplyDelete
  26. These sash windows are a testament to craftsmanship and timeless design. The attention to detail in both construction and aesthetics is truly inspiring.

    ReplyDelete
  27. It was great to see someone write on this topic. Thanks for sharing your thoughts. Replacement Window Albuquerque, NM.

    ReplyDelete

I've been getting a lot of spam so had to tighten up comments permissions. Sorry for any inconvenience. I do like to hear from real people